Recording Dialog

In this dialog, you can make recording settings and start recording an audio file.

  • To open the Recording dialog, open the Audio Editor or the Audio Montage window, and on the transport bar, click Record.

Main Buttons

Record

Starts recording. Depending on the recording options, the Pause mode is activated.

Split Now

Opens the audio already recorded in a new window while recording continues. By clicking this button, you can decide when the file is split. The button is activated if you are recording a named file, you are not pausing, and Auto-Split is not activated.

Pause

Pauses recording.

Stop

Stops recording.

Discard

Stops recording and deletes anything recorded so far.

Method Tab

On this tab, you can define options for starting, stopping, and pausing the recording automatically. You can select an input device and choose to start a recording at a specific time or stop if after a specific duration.

File to Create

Specify whether you want to record a temporary file to be saved later, or record to a file with a specific name and location.

Auto Number From

If this option is activated and you record multiple files, increasing numbers are added to the file names of the files.

Name

The name of the file to be written, without the path. When typing, all files in the selected folder that start with the same letters are displayed. To display all files in the selected folder, click the list icon.

Location

Specifies the folder where you want to save the recording.

Audio File Format

Opens the Audio File Format dialog, where you can specify the file format.

Location of the Recording

Specifies where the audio is recorded:

  • If Create New Audio File Window is selected, the audio is recorded in a new audio file window.

  • If Add to Active Audio File is selected, the audio is recorded in the active audio file window at the edit cursor position (if no audio file window exists, a new one is created).

  • If Add to Selected Track of Montage is selected, the audio is recorded in an existing audio montage at the edit cursor position (if no audio montage exists, a new one is created).

Input

Specify if you want to record the audio device input or the audio output from the Master Section.

Set Input

If you are using an ASIO driver, this button opens the Recording Channels dialog, where you can activate channels for recording. Up to 8 input channels can be used simultaneously. When additional inputs are selected, the number of meters in the dialog is automatically updated.

Auto-Start if Sound Detected

If this option is activated, recording starts when the audio input level exceeds the threshold level specified on the Values tab.

Auto-Start at given Time

If this option is activated, recording starts at a specified time. Specify the time on the Values tab.

Auto-Stop after given Duration

If this option is activated, recording stops automatically after the duration specified on the Values tab.

Auto-Stop if Silence

If this option is activated, recording automatically stops when the audio input level drops below a specified threshold level and stays there for a specific amount of time. Specify the level and the duration on the Values tab.

Auto-Pause if Silence

If this option is activated, recording automatically pauses when the audio input level drops below a specified threshold level and stays there for a specific amount of time. Specify the level and the duration on the Values tab.

Auto-Create Markers at Pause Point

If this option is activated, a generic marker is created each time you click Pause during recording.

Auto-Create Markers at Silence Points

If this option is activated, a generic marker is created each time the audio input level drops below a specified threshold level and stays there for a specific amount of time. Specify the level and the duration on the Values tab.

Auto-Split

If this option is activated, the recording is automatically split into several audio files either after a specific amount of time or at a specific file size. Auto-Split is useful if you make long continuous audio recordings, such as live recordings.

The Auto-Split option is only available when Named File is selected. Selecting Auto-Split automatically activates the Auto Number option for audio file names. Split files are contiguous, that is, there are no gaps between the files.

  • To set the file size after which you want the recording to create a new file, select the Values tab and specify the File Size in the Auto-Split Parameters section.

  • To set the duration after which you want the recording to create a new file, select the Values tab and specify the File Duration in the Auto-Split Parameters section.

Note

It is recommended to save each Auto-Split recording in an empty folder. This prevents the Auto Number option from creating files with names that already exist in this location.

Options Tab

On this tab, you can make additional settings for the recording process.

Activate Monitoring When Opening Record Window

If this option is activated, the meters are activated when the Recording dialog opens. If this option is deactivated, the meters and the audio thru are displayed when pressing Record or activating Monitor.

Deactivate Monitoring When Ending Recording

If this option is activated, the meters and the audio thru are deactivated when recording ends. This releases the audio device input.

Stop Playback When Monitoring or Recording

If this option is activated, playback stops before monitoring or recording starts.

Show Discard Button

Determines whether the Discard button is visible or hidden.

Confirm when Discarding Recording

If this option is activated, you are asked to confirm before discarding a recording.

Confirm when Stopping Recording

If this option is activated, you are asked to confirm before stopping a recording.

Confirm Name of Markers to Drop

If this option is activated, you are asked to enter a name for the last dropped marker.

Open Audio File in WaveLab Pro after Recording

If this option is activated, the audio files are opened in WaveLab Pro after recording.

Add Markers when Inserting Recording in Audio File

If this option is activated and a recording is inserted into an audio file, markers are added encompassing the new samples.

After Recording, Move Edit Cursor at the End

If this option is activated, the edit cursor is moved to the end of the recording.

Values Tab

On this tab, you can define values for the various recording options.

Auto-Start on Sound – Threshold (RMS)

Specify the sound level that will trigger recording.

Auto-Start on Sound – Record Previous Samples

Allows you to include a short section of audio before the start point, to capture attacks, for example. It is only relevant if Auto-Start if Sound Detected is activated.

Silence Detection – Threshold (RMS)/Silence Duration Required

The threshold value used for the options Auto-Stop if Silence and Auto-Create Markers at Silence Points. It is used in conjunction with the Silence Duration Required setting, so that recording is stopped or a marker is added if the input level stays below the threshold value for the specified duration.

Recording Programming – Start

Determines the time at which recording starts when the option Auto-Start at Specific Time is activated.

Recording Programming – On Tomorrow

If this option is activated, you can specify a time on the next day (starting midnight).

Recording Programming – Duration

Determines the length of the recording if Auto-Stop after Specific Duration is activated.

Auto-Split Parameters

If File Size is activated, a new file is created when the recorded file reaches the size specified in the corresponding value field. This option is only active if Auto-Split is activated in the Method tab.

If File Duration is activated, a new file is created when the recorded file reaches the length specified in the corresponding value field. This option is only active if Auto-Split is activated in the Method tab

Pause Memory

This is a safety buffer when you are using the Pause button. When you resume recording, this buffer is used to restore the last short section of audio before you deactivated the Pause button. This way, you can resume recording even if you deactivated the Pause button a bit too late.

Meter Display

Level/Spectrum

Specifies which meter to display.

Settings

Opens the Level/Pan Meter Settings dialog, where you can customize the meter settings.

Reset

Resets the peak values.

Monitor

If this option is activated, the audio input is also sent to the output ports (not available if Windows MME drivers are used).

Mix with Playback

If this option is activated and the same audio ports are selected for monitoring and for playback (in the VST Audio Connections tab), the signals are mixed. If this is not activated, the monitoring signal has priority.

This allows you to toggle between the auditioning of the recorded signal and the playback signal, and to have full control over the monitor outputs.

Marker

Allows you to set markers during the recording.

Next Marker Name

Edit the name of the next marker to insert.

Solo

Reduces/Increases the size of the window and hides/shows all other WaveLab Pro windows.