Edit Strings and Tuning dialog

• You can open the Edit Strings and Tuning dialog in Setup mode by expanding the card of the player holding the fretted instrument in the Players panel, then clicking the arrow in its label and choosing Edit Strings and Tuning.

The Edit Strings and Tuning dialog comprises the following:

1. Instrument

   Displays the name of the selected fretted instrument.

2. String editor

   Allows you to select and edit individual or all strings of the fretted instrument. The arrangement of strings in the editor matches that of the real instrument. The pitch and total number of frets of each string is shown to the left of the vertical line that represents the nut.

3. Controls

   Allow you to edit individual or multiple strings. The following controls are available when at least one string is selected in the string editor:

   • Open pitch: Allows you to set the open pitch of the string using the note name and octave, such as C4 for middle C. If necessary, you can add # for sharp and b for flat.

   • No. of frets: Allows you to set the number of frets for the selected strings.

   • Starting fret: Allows you to set the number of the first fret on the selected strings. For example, the fifth string on the banjo starts at fret 5.

   • Tune Up Half-Step: Allows you to raise the open pitch of the selected strings by a half-step (semitone).

   • Tune Down Half-Step: Allows you to lower the open pitch of the selected strings by a half-step (semitone).

   • Irregular fret spacing: Allows you to set non-chromatic fret arrangements for instruments with fretboards that correspond to other scales, such as the dulcimer. Enter 1 for a half-step and 2 for a whole step, with each step separated by a comma. For example, enter 2,2,1,2,2,2,1 to set the pattern for a major scale.

4. Select all

   Selects all strings at once.

5. Action bar

   Contains options that allow you to change the number and arrangement of strings.

   • Add String: Adds a new string below the lowest currently selected string. The new string is a duplicate of the lowest currently selected string.

   • Add String at Top: Adds a new string at the top of the fretboard. The new string is a duplicate of the previous top string.

   • Move string buttons: Allow you to move the currently selected strings up/down the fretboard.

   • Reset to Default: Returns all strings and corresponding tunings to the factory default settings for the fretted instrument.

   • Delete String : Deletes the selected strings.

6. Import Tuning

   Opens the File Explorer/macOS Finder, where you can select the .doricotuning file that you want to import and apply to the fretted instrument.

7. Export Tuning

   Opens the File Explorer/macOS Finder, where you can select the location to which you want to export the strings and tuning settings of the fretted instrument as a .doricotuning file. You can then import the .doricotuning file into other instruments/projects and share it with other users.