VintageCompressor
The VintageCompressor is modeled after vintage type compressors.
- Input Gain (-24 to 48 dB)
-
In combination with the Output Gain setting, this parameter determines the compression amount. The higher the input gain setting and the lower the output gain setting, the more compression is applied.
- Output Gain (-48 to 24 dB)
-
Sets the output gain.
- Gain Reduction LED
-
Indicates the amount of compression of the signal.
- Attack (0.1 to 100 ms)
-
Determines how fast the compressor responds. If the attack time is long, more of the early part of the signal passes through unprocessed.
- Attack Mode (Punch On/Off)
-
If this option is activated, the early attack phase of the signal is preserved, retaining the original punch in the audio material, even with short Attack settings.
- Release (10 to 1000 ms or Auto mode)
-
Sets the time after which the gain returns to its original level. If Auto Release is activated, VintageCompressor automatically finds the best release setting for the audio material.