Limiter

The Limiter module makes sure that the output level never exceeds a set output level, to avoid clipping in following devices.

Band Settings

On/Off: Activates/Deactivates the corresponding section.

Harmonics

If the Harmonics section is activated, the Limiter module starts limiting the signal softly. At the same time, harmonics are generated, adding a warm, tube-like characteristic to the audio material.

Drive: Allows you to adjust the amount of gain boost for the signal to raise the amount of soft-clipping.
Gain: Sets the amount of attenuation.

Brickwall

Due to its fast attack time, Brickwall Limiter can reduce even short audio level peaks without creating audible artifacts. The limiting amount is displayed between the input and the output meter.

Release: Sets the time after which the gain returns to the original level when the signal drops below the threshold. If Auto Release is activated, the plug-in automatically finds the best release setting for the audio material.
Output: Sets the output level.

Maximizer

Maximizer raises the loudness of audio material without the risk of clipping. The limiting amount is displayed between the input and the output meter.

Optimize: Determines the loudness of the signal.
Output: Sets the output level.