Rotary Page
The settings on this page only have an effect on the sound when signals are sent to the rotary effect using the Rotary/Amp control on the Organ page.
- Rotation Speed
-
Changes the rotation speed of the horn and drum. When set to Fast, the Doppler effect is stronger. When set to Stop, there is no Doppler effect because the drum and horn do not rotate. Because the horn and drum accelerate and decelerate at different speeds, the transition from Slow to Fast and vice versa generates highly interesting sounds.
- Distance
-
Sets the distance between the microphones and the horn and drum. The amplitude modulation of the sound decreases with the distance of the microphones. Set this to higher values for less amplitude modulation.
- Cabinet
-
The horn and drum sound different when recorded through the louvers of the cabinet. Use this parameter to color the horn and drum with the sound of the cabinet. With a setting of 100%, you obtain the full sound of the cabinet.
- Balance
-
Adjusts the balance between the horn and drum microphones. With a setting of 0%, you hear only the drum. With a setting of 100%, you hear only the horn.
- Slow
-
Adjusts the slow speed of the horn and drum at the same time.
- Fast
-
Adjusts the fast speed of the horn and drum at the same time.
- Accel
-
Adjusts the acceleration time for raising and lowering the rotation speed of the horn and drum.
- Horn Mic Angle
-
Adjusts the stereo spread of the horn microphones. With a setting of 0°, the sound image is mono. With a setting of 180°, the sound image is fully stereo.
- Drum Mic Angle
-
Adjusts the stereo spread of the drum microphones. With a setting of 0°, the sound image is mono. With a setting of 180°, the sound image is fully stereo.
- Treble
-
Adjusts the tone color of the high frequencies.
- Drive
-
Adjusts the distortion of the amplifier.
- Bass
-
Adjusts the tone color of the low frequencies.
- Gain
-
Adjusts the gain after the rotary and drive.