Table of Contents
Configuring WaveLab Elements
You can configure WaveLab Elements according to your needs.
Multi-User Settings
If you use multiple WaveLab Elements stations in your studio or in your school, for administration, etc., you can set up one WaveLab Elements station to be the master station. The shared preferences and presets of this station can then be used by other slave stations.
Setting Up a Multi-User Setup
You can use the settings that you have made on a master WaveLab Elements station for other slave WaveLab Elements stations.

Setting Up a Multi-User Setup

You can use the settings that you have made on a master WaveLab Elements station for other slave WaveLab Elements stations.

Procedure

Set up a WaveLab Elements station with all settings and presets that you want to use on other WaveLab Elements stations.
Assign read-only access to the settings folder of the master WaveLab Elements station.
Open WaveLab Elements on another station for which you want to use the master settings.
Select File > Preferences > Global.
Select the General tab.
In the Synchronization Settings section, set up the Master Folder, specify when the settings should be synchronized, and specify whether to include the preferences and/or presets.
Close WaveLab Elements.
Copy the startup.ini (Windows) or startup.plist (Mac) of the slave WaveLab Elements station to the settings folder of the other slave WaveLab Elements stations.

All slave WaveLab Elements stations use the settings of the master WaveLab Elements station.