The Equalizer page

The Equalizer page gives you access to a high-quality 4-band parametric stereo equalizer. With the four frequency bands, 1 Low, 2 Mid, 3 Mid and 4 High, you can shape the tone color of the piano, e.g. for a brighter or darker sound. The two midrange bands act as peak filters, while the low and high bands act as shelving filters. All bands are fully parametric with adjustable Gain, Frequency and Q factor.

Adjusting the equalizer settings

  1. Click the EQ button to the left of the equalizer controls to activate the equalizer.

    This activates all 4 EQ bands.

  2. Adjust the Gain, Freq, and Q parameters as desired. To adjust Gain and Frequency simultaneously, drag the points in the EQ graph to the left.

Each frequency band offers the following controls:

Gain

Use this to set the amount of cut or boost for the EQ band. The control range is from -24dB to +24dB.

Freq

This sets the frequency that is cut or boosted by the Gain parameter. The control range is from 20Hz to 20000Hz.

Q

This sets the quality factor. Use this to adjust the band- width of the midrange peak filters from wide to narrow. By increasing the Q value on the low and high shelving filters, you can add a dip to their shape. The control range is from 0.5 to 10.0.