Table of Contents
Configuring WaveLab Pro
You can configure WaveLab Pro according to your needs.
Multi-User Settings
If you use multiple WaveLab Pro stations in your studio or in your school, for administration, etc., you can set up one WaveLab Pro station to be the master station. The shared preferences and presets of this station can then be used by other slave stations.
Setting Up a Multi-User Setup
You can use the settings that you have made on a master WaveLab Pro station for other slave WaveLab Pro stations.

Setting Up a Multi-User Setup

You can use the settings that you have made on a master WaveLab Pro station for other slave WaveLab Pro stations.

Procedure

Set up a WaveLab Pro station with all settings and presets that you want to use on other WaveLab Pro stations.
Assign read-only access to the settings folder of the master WaveLab Pro station.
Open WaveLab Pro on another station for which you want to use the master settings.
Select File > Preferences > Global.
Select the General tab.
In the Synchronization Settings section, set up the Master Folder, specify when the settings should be synchronized, and specify whether to include the preferences and/or presets.
Close WaveLab Pro.
Copy the startup.ini (Windows) or startup.plist (Mac) of the slave WaveLab Pro station to the settings folder of the other slave WaveLab Pro stations.

All slave WaveLab Pro stations use the settings of the master WaveLab Pro station.