VST MultiPanner Plug-in Panel for 3D Channel Configurations
The VST MultiPanner plug-in panel offers additional settings and a 3D pan area for channels that are routed to an output bus or group channel with a 3D channel configuration such as 9.1 Dolby Atmos.
-
To access these settings, click Show/Hide Extended Display .
- Elevation Pattern buttons
-
Allow you to activate/deactivate predefined elevation patterns for the height parameter.
If no elevation pattern is active, you can adjust Bottom-Top Pan manually.
- Top View
-
Shows the room from the top. The position on the z-axis is represented by the size of the panning balls: the bigger the panning ball, the higher the sound source is positioned in the room. To adjust the position on the z-axis, middle-click and drag.
- Rear View
-
Shows the room from the rear and allows you to position the sound source on the x-axis and z-axis by dragging the panning balls. The position on the y-axis is represented by the size of the panning balls: the bigger the panning ball, the nearer the sound source is positioned to the rear of the room. To adjust the position on the y-axis, middle-click and drag.
- Bottom-Top Pan
-
Sets the position of the signal on the z-axis. If you move this control all the way to the right, the sound comes from the top speakers only.
- Elevation On/Off
-
Activates/Deactivates the height parameter.
NoteIf elevation is deactivated, Bottom-Top Pan is set to bottom, even if automation for bottom-top panning is present. Elevation On/Off can also be automated.
- Tilt Signal around Y-Axis
-
Tilts the sound source around its own y-axis. This option is only available for stereo and multi-channel signals.
- Tilt Signal around X-Axis
-
Tilts the sound source around its own x-axis. This option is only available for stereo and multi-channel signals.
- Height Divergence
-
Determines the attenuation curve that is used when positioning sound sources on the z-axis.