Making Filter Settings
Each audio-related channel has separate high-cut and low-cut filters that allow you to attenuate signals with frequencies that are higher or lower than the cutoff frequency.
Procedure
- On the MixConsole toolbar, click Racks and activate Pre (Filters/Gain/Phase) to show the Pre rack above the fader section.
-
Click to the left of the high-cut filter to activate the high-cut filter. You have the following options:
-
Drag the slider to adjust the cutoff frequency.
The available range spans from 20 kHz to 50 Hz.
-
Click Select Filter Slope on the right of the high-cut filter to select a filter slope.
You can choose between 6, 12, 24, 36, and 48 dB. The default value is 12 dB.
-
-
Click to the left of the low-cut filter to activate the low-cut filter. You have the following options:
-
Drag the slider to adjust the cutoff frequency.
The available range spans from 20 Hz to 20 kHz.
-
Click Select Filter Slope on the right of the low-cut filter to select a filter slope.
You can choose between 6, 12, 24, 36, and 48 dB. The default value is 12 dB.
-
Result
The changed settings are visible in the curve display. If you deactivate the high-cut and low-cut filters, the filter curves are removed from the display. Bypassed high-cut and low-cut filters are displayed in a different color.