REVerence

REVerence is a convolution tool that allows you to apply room characteristics (reverb) to the audio.

By recording an impulse in a room, you capture the characteristics of this room. Convolution superimposes these characteristics to the sound. The result is a very natural sounding reverb. Included with this effect is a collection of high-quality reverb impulse responses.

Impulse Response

Allows you to select an impulse response. This determines the basic sound character of the reverb.

Reverse

Reverses the impulse response.

Predelay

Determines the amount of time between the dry signal and the onset of the reverb. With higher predelay values, you can simulate larger rooms.

Time

Controls the reverb time. At a setting of 100 %, the impulse response is applied with its original length.

Size

Scales the size of the simulated room. At a setting of 100 %, the impulse response is applied as recorded in the original room.

Level

Adjusts the level of the impulse response.

Equalizer

Activates the built-in three-band equalizer.

ER/Tail Split

Sets the split point between the early reflections and the reverb tail.

ER/Tail Mix

Sets the balance between the early reflections and the reverb tail. At a setting of 50 % the early reflections and the tail have the same volume level. Settings below 50 % raise the early reflections and lower the tail, as a result the sound source moves towards the front of the room. Settings above 50 % raise the tail and lower the early reflections, as a result the sound source moves towards the back of the room.