Mixer panel
The Mixer panel allows you to control the sounds produced in playback by instruments in the project, both for the master output and each individual instrument’s channel. It is located in the lower zone at the bottom of the window in Write mode.
You can hide/show the Mixer panel in Write, Engrave, and Play modes in any of the following ways:
-
Press Cmd-8.
-
In the toolbox on the left, click Show Lower Zone , then choose Mixer in the lower zone.
The Mixer panel toolbar contains the following options:
- Deactivate All Mute States
-
Allows you to deactivate all mute instrument states. Indicates whether any instruments have an active mute state.
- Deactivate All Solo States
-
Allows you to deactivate all solo instrument states. Indicates whether any instruments have an active solo state.
- Resize Lower Zone
-
Allows you to change the height of the lower zone.
Each channel in the Mixer panel provides the following controls and displays:
-
Pan
Allows you to position the sound of the track on the stereo spectrum for stereo playback.
-
Fader value
Displays the current volume value corresponding to the position of the fader.
-
Fader
Allows you to control the volume level of the track.
-
Channel meter
Indicates the output volume of the channel in real time.
-
Mute/Solo
Allows you to mute/solo the track. Indicates whether the corresponding track has an active solo or mute state.
-
Channel name
Displays the name of the channel.