Wave Files

Wave files have the extension .wav and are the most common file format on the PC platform.

  • To open the settings for wave files, select Wave in the File Type pop-up menu.

Sample Rate

Sets the sample rate for the mixdown file.

Note

If you set the value lower than the project sample rate, the audio quality degrades and the high-frequency content is reduced. If you set the value higher than the project sample rate, the file size increases without increasing the audio quality. For CD burning, select 44.100 kHz, because this is the sample rate used on audio CDs.

Bit Depth

Allows you to select a bit depth for the mixdown file. You can select 8-bit, 16-bit, 24-bit, 32-bit, 32-bit (float), or 64-bit (float). If you plan to re-import the mixdown file into Cubase, select 32-bit (float). This is the resolution used for audio processing in Cubase. 32-bit (float) files are twice the size of 16-bit files. For CD burning, use the 16-bit option, as CD audio is always 16 bit. In this case, we recommend dithering.

Activating the UV-22HR dithering plug-in reduces the effects of quantization noise and artifacts when converting the audio to 16 bit. 8-bit resolution results in limited audio quality and should only be used if required.

Export as

Allows you to select a channel mode for the mixdown file:

  • Interleaved

    Allows you to export to an interleaved file.

  • Split Channels

    Allows you to export the 2 channels of a stereo bus or all subchannels of a multi-channel bus as separate mono files.

  • Mono Downmix

    Allows you to downmix all the subchannels of a stereo or surround channel or bus to a single mono file.

    For stereo, the Stereo Pan Law as defined in the Project Setup dialog is applied to avoid clipping.

    For surround, the channels are summed and divided through the number of channels used (in case of a 5.1 channel = (L+R+C+LFE+Ls+Rs)/6).

  • L/R Channels from Surround

    Allows you to export only the left and right subchannels of a multi-channel bus into a stereo file.

Insert Broadcast Wave Chunk

Activates the embedding of additional file information in Broadcast Wave format.

Note

By activating this option, you create a Broadcast Wave file. Some applications may not be able to handle these files. If you get problems using the file in another application, deactivate Insert Broadcast Wave Chunk and export the file again.

Set up Broadcast Wave Chunk

Opens the Broadcast Wave Chunk dialog where you can enter information.

Insert iXML Chunk

Includes additional project-related metadata, such as project name, author, and project frame rate.

Insert Tempo Definition

This option is only available if Insert iXML Chunk is activated. It allows you to include tempo information from the tempo track or from the Definition section of the Sample Editor in the iXML chunk of the exported files.

Don’t Use Wave Extensible Format

Deactivates the Wave Extensible format that contains additional metadata, such as the speaker configuration.

Don’t Use RF64-Compliant File Format

Deactivates the RF64-compliant format that allows file sizes to exceed 4 GB.