Bass Manager

If your main speakers are small, this plug-in allows you to achieve full-range sound by using the LFE speaker of the studio as a subwoofer. If your LFE is small but the main speakers provide full-range sound, the plug-in allows you to strengthen the LFE sound by routing higher frequencies from the LFE to the main speakers.


 

Cubase LE

Cubase AI

Cubase Elements

Cubase Artist

Cubase Pro

Nuendo

NEK

Included with

X




If your monitoring system is connected directly to your audio interface and lacks a bass management system, you can use Bass Manager in the Control Room inserts to adjust the signal levels and signal routing of the LFE and main speakers. Thus, small speakers can achieve full-range sound.

Input/Output Level Meters

Level In

Shows the level of the input signal.

Level Out

Shows the level of the output signal.

Mains

Subwoofer

If this is activated, the low part of the main speakers is routed to the subwoofer.

Freq

Sets the crossover frequency. Frequencies below this value are routed to the subwoofer.

Gain

Sets the amount of attenuation/boost of the signal that is routed to the subwoofer.

LFE

Center

If this is activated, the LFE signal is routed to the center channel.

L/R

If this is activated, the LFE signal is routed to the left and right channels.

Freq

Sets the crossover frequency. Frequencies above this value are routed to the left and right channels or to the center channel.

Gain

Sets the amount of attenuation/boost of the signal that is routed to the left and right channels or to the center channel.

+10  dB

Boosts the level of the LFE signal by 10 dB.

Subwoofer

Solo

Solos the subwoofer signal.

Mute

Mutes the subwoofer signal.

Low Cut

Additional low-cut filter for the subwoofer.

High Cut

Additional high-cut filter for the subwoofer.

+10  dB

Boosts the level of the subwoofer signal by 10 dB.

Note

You can also use the graphical displays to set the parameters or enter the parameter values manually in the value fields.