Equalizer
This high-quality 4-band parametric equalizer allows you to shape the tone color, to create a brighter or darker sound, for example. All bands are fully parametric with adjustable Gain, Frequency, and Quality parameters. Furthermore, you can add a high-cut and a low-cut filter and edit their settings.
Click one of the numbered buttons to show the settings for the corresponding frequency band. The two mid-range bands act as peak filters, and the low and high bands act as shelving filters. Each frequency band offers the following controls:
- On/Off
-
Activates/Deactivates the corresponding frequency band.
- Gain
-
Sets the amount of cut or boost for the corresponding band.
- Freq
-
Sets the frequency that is cut or boosted with the Gain parameter.
- Q (Quality)
-
Adjusts the bandwidth of the mid-range peak filters from wide to narrow. By increasing the Q value on the low and high shelving filters, you can add a dip to their shape.
The buttons to the left and the right of the numbered buttons allow you to show the settings for the low-cut and the high-cut filter, respectively. For these filters, the following parameters are available:
- Low-Cut On/Off
-
Activates/Deactivates the low-cut filter.
- High-Cut On/Off
-
Activates/Deactivates the high-cut filter.
- Slope
-
Sets the slope for the filter. You can choose from 6, 12, 24, 36, and 48 dB per octave.
- Freq
-
Sets the frequency for the filter.
- Output meter
-
Allows you to monitor the output level. The peak level is shown below the meter.
To reset the peak level, click the value field.